Preparing the Surface
Use the sealant without diluting any other liquid. The contact surface must be clean and debris, stain or any other previous sealants and waxes free.
Directions for Application
A brush, roller or garden-type sprayer can be used to apply. A well applied single coat is usually sufficient; however, two coats are recommended on very porous surfaces or heavy walkaway areas. Make sure to apply the second coat after five hours of the first application. An approximate period of 20 minutes will dry the Mr. Seal sealant on marble or granite. Brush the surface before it is completely dry. It is recommended to let the surfaces dry at least for 8 hours, before traffic is allowed on the treated area. However, for maximum, long lasting protection, allow the surface to be cured for 24 hours.
Maintenance
To clean exterior surfaces applied with Mr. Seal sealant, use a garden hose with a pressure nozzle or pressure washer with a maximum pressure of 1000 PSI; choose according to the surface. For interior surfaces, treated with the sealant, simply mop or wipe with a soft cloth or sponge using a mild liquid cleaner or water. Harsh cleaning agents such as abrasive powders, ammonia, acids, bleach, solvents or abrasive scrubbing pads should NOT be used.
Cleaning Application Equipment
Rinse equipment with warm or cold water.
Coverage
One litre will approximately cover 30-40 sq. metres, depending upon the porosity of the substrate and method of application.
Safety Directions
Do not breathe vapour or spray mists. Avoid contact with skin and eyes
Storage/Shelf Life and Disposal
Keep sealed in original containers and store in a cool dry place. When properly stored, shelf life is a minimum of six months from date of opening the container. Do not allow freezing. Do not apply on surfaces below 8 deg. C. Dispose with garbage or leave at an appropriate metal recycling collection point.
